Cardin RPQ Inbetriebnahme Und Benutzung Technische Installations- Und Referenzzeichnungen Seite 11

REMARKS
These instructions are aimed at professionally qualified "installers of electrical equipment" and must respect
the local standards and regulations in force. The use and installation of these appliances must rigorously respect
the indications supplied by the manufacturer and the safety standards and regulations in force.
Attention! Only for EU customers - WEEE marking. This symbol indicates that once
the products life-span has expired it must be disposed of separately from other rubbish.
The user is therefore obliged to either take the product to a suitable differential collec-
tion site for electronic and electrical goods or to send it back to the manufacturer if the
intention is to replace it with a new equivalent version of the same product. Suitable differential
collection, environmental friendly treatment and disposal contributes to avoiding negative effects
on the ambient and consequently health as well as favouring the recycling of materials. Illicitly
disposing of this product by the owner is punishable by law and will be dealt with according to
the laws and standards of the individual member nation.
Description
The S504 and S508 Radio control systems consist of one or more transmitters and one or more
receivers which can be combined to meet the specific needs of the system. The radio programmer is
able to memorise up to 1000 different codes and the generated code is memorised in a non-volatile
memory module.
Important: The transmitted code changes for each command (rolling code). If disturbance interrupts
the transmission, the receiver will wait for a different code, the relay can then only be activated by first
releasing and then pressing the transmitter channel button again.
Use
For specific uses such as the remote control of external (gardens) and internal lighting; the remote control
of power sockets 230 Vac 2000 W.
11