Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use the arrows to adjust the time.
button again to set the minutes.
c)
Regeneration cycle settings:
Use the arrows to set the desired regeneration start time.
Press the same
CAUTION!
parameters.
2.2. Detailed menu:
To enter this menu, hold down the and buttons simultaneously.
In this menu, use the arrows to adjust the following parameters:
a) valve position,
b) operating mode,
c)
ion exchange resin quantity,
d) regeneration frequency,
e) backwash time for the purification filter,
f)
backwash time for the softening filter,
g) time of taking the salt solution from the brine tank and bed formation rinsing
(slow rinsing),
h) rinsing time of the softening filter with brine solution (fast rinsing),
i)
the time to refill the tank,
Set the hour at first, then press the
button to confirm the settings of the above
Werbung
Inhaltsverzeichnis
