Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons of impaired mental, sensory
and intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
The unit must be installed on the main water supply after the meter.
3.3. Installation of the unit
1. Connection to the water source/outlet:
a) Screw the three wires [1] to the three connectors [2, 3, 4] on the unit with a
wrench. Make sure that the wire nuts are tightened on the connectors. This
will prevent leaks.
2. Connect the decompression valve:
Werbung
Inhaltsverzeichnis
