Specification; Assembly - Axminster AW240WL Originalanleitung

Code
Model
Rating
Power
Speed
Spindle Taper
Spindle Thread
Taper Tailstock
Distance Between Centres
Max Diameter over Bed
Overall L x W x H
Weight
The machine and its accessories will arrive coated
with corrosion preventative grease. This will need
to be cleaned from the machine, its components
and accessories prior to it being set up. Use
proprietary degreaser. Wear overalls, coverall
and eye protection before cleaning.
95% of the machine comes fully assembled, all that
remains is to fit the four prong drive centre (F), the
60˚ live centre (G), see fig 01-02 and tailstock wheel
handle (E). Locate the handle (E) for the tailstock
control wheel and screw securely into the
pre-threaded hole in the wheel rim flange,
using a flat blade screwdriver, see fig 03.
F
F
E
G
5

SPECIFICATION

375W 230V 1 ph
(5) 700 -1000 -1400 -2000 - 2800rpm
1" x 8tpi (Ref T04M)
440 mm(17")
800 x 205 x 365 mm

ASSEMBLY

Fig 01-02-03
G
Continues Over...
107673
AW240WL
Workshop
2MT
2MT
240 mm
38 kg