Baseus PPCXW10 Benutzerhandbuch Seite 7

Tips:
Please read all instruction and warning before using this product. Non-standard
•
use will damage the product or personal safety.
The charging contact surface on the back of the mobile phone should not be
•
covered with metal materials, such as iron sheet, ring, metal protective case, etc.
When the mobile phone is charging, if the intermittent charging or serious
•
heating is found, it may be that the receiving coil of the mobile is not completely
aligned with the wireless charging coil, or there is a metal foreign matter in the
protective sleeve of the mobile phone. Please try to cool the mobile phone,
remove the protective sleeve, and then align it in the correct position.
This product has over-current protection function. If the product is used
•
improperly, it will turn off or reduce the output power, reduce the charging speed
and ensure safety. Please check whether the equipment is used improperly.
Please do not put the product in water, fire medium high temperature
•
environment (more than 45 degrees) and low temperature environment (less
than -20 degrees), do not let children play, especially do not let children contact
accessories.
Please use a dry soft cloth to clean the surface. Do not use chemicals, soap or
•
detergent.
Please do not disassemble the machine by yourself. Improper use or improper
•
placement of the product by the suer may reduce the service life or damage the
product. Therefore, the responsibility does not belong to the warranty
responsibility or the manufacturer's responsibility. Please understand.
Mobile power has conversion efficiency, so the battery capacity of mobile power
•
is not equal to the rechargeable capacity.
Please charge your power regularly (at least every 5 months is recommended) to
•
maintain its long service life.
Improper use of the product may easily result in the product itself or endanger
•
the safety of personal and property.
In case of any personal and property damage caused by consumer's improper
•
use or warning in violation of the product instructions, the company will bear all
consequences, and the company will not bear any legal liability.
Non professionals are strictly prohibited to decompose this product.
•
Avoid using electrical appliances or loads that exceed the output of the product
•
(the circuit will be protected, no output).
Avoid strong physical effects, including knocking, throwing, trampling, squeezing,
•
etc.
7