Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GWS 24-300 Professional Originalbetriebsanleitung

All manuals and user guides at all-guides.com
OBJ_BUCH-280-001.book Page 24 Thursday, June 12, 2008 12:54 PM
24 | English

Technical Data

Cut-off Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Max. cutting depth with cutting guide
Reduced starting current
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of un-
favourable mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting-off concrete: Vibration emission value
2
a =8.0 m/s , Uncertainty K=1.5 m/s
h
Cutting-off metal: Vibration emission value
2
a =8.0 m/s , Uncertainty K=1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
1 609 929 K56 | (12.6.08)
W
W
rpm
mm
mm
kg
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
2
,
the hands warm, organisation of work patterns.
2
.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 50144 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
GWS 24-300 GWS 24-300 J
Professional Professional
0 601 364 0.. 0 601 364 9..
2400 2400
1670 1670
5000 5000
300 300
M 14 M 14
100 100
–
6.2 6.2
/ II / II
Bosch Power Tools