Additional Safety Warnings; Functional Description; Intended Use; Product Features - Bosch GWS 24-300 Professional Originalbetriebsanleitung

All manuals and user guides at all-guides.com
OBJ_BUCH-280-001.book Page 23 Thursday, June 12, 2008 12:54 PM

Additional safety warnings

Wear safety goggles.
Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call
the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
Release the On/Off switch and set it to the
off position when the power supply is inter-
rupted, e. g., in case of a power failure or
when the mains plug is pulled. This prevents
uncontrolled restarting.
When working stone, use dust extraction.
The vacuum cleaner must be approved for
the extraction of stone dust. Using this
equipment reduces dust-related hazards.
Use a cutting guide when cutting stone.
Without sideward guidance, the cutting disc
can jam and cause kickback.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Bosch Power Tools

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for cutting metal and
stone materials without using water while resting
firmly with the cutting guide on the workpiece.
For cutting metal, a special cutting guide (acces-
sory) must be used.
For cutting stone, a special cutting guide with
dust extraction protection guard (accessory)
must be used.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Bow handle
2 Thread for bow handle
3 Spindle lock button
4 Grinder spindle
5 Protection guard for cutting
6 Screw for adjustment of protection guard
7 Clamping lever for protection guard
8 Mounting flange
9 Grinding/cutting disc*
10 Face plate
11 Quick-clamping nut
12 Clamping nut
13 Allen Key**
14 Cutting guide
15 On/Off switch
16 Encoding key
17 Cutting guide with dust extraction protec-
tion guard *
18 Elbow *
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the deliv-
ery scope)
1 609 929 K56 | (12.6.08)
English | 23
*