Audio; Installer; Service - Abus TVIP91100 Bedienungsanleitung

Switching input:
Motion detection:
Restart:
Watchdog error:
Day/night switching:
Authentication error:
Back up settings:

10.4.8 Audio

This option only appears if the camera has audio functionality. There is one model with a built-in
microphone (TVIP91100) in addition to five models with connectible audio input and output
devices (TVIP92100, TVIP92300, TVIP92500, TVIP926X0 and TVIP92700).
Audio input:
Audio output:

10.4.9 Installer

Language:
The home page and login window are displayed in the language of the PC as long as
this language is available in the camera. If the language is not available, it will be
displayed in English.
In the next few steps, the passwords for the "installer" user, recording client (e.g. NVR) and
mobile client (e.g. APP) can be set.
Change password:
Password:
Confirm password:

10.4.10 Service

Country of service:
Network frequency:
all cameras in the TVIP9XXXX series have a switching input (an
optional cable in dome cameras). On standby, you can select N.O.
(normally open) or N.C. (normally closed).
select the camera's internal motion detection. This will analyse all
configured masks. It is not possible to detect which mask has made
the trigger.
triggering when the camera restarts
the system can restart automatically after a serious malfunction (this
is known as 'watchdog'). This can be used as a trigger.
choose between switching to day or night mode as an event trigger.
entering an incorrect password twice can be used as a trigger.
the last page of event configuration displays an overview of all rule
parameters that have been set. You must then press the "Save"
button.
settings for input volume
settings for output volume
select language for the "installer" user. The settings pages available
are displayed in this language. The language settings for the
"master" and "user" users are unaffected by this.
tick the checkbox to show the field for entering your password and
confirming this password.
enter the new password.
confirm the new password.
select the country responsible for providing support for the camera
in use.
set the network frequency (only 720p camera types).
In Germany the standard network frequency is 50 Hz.
105