Cleaning And Storage; Troubleshooting - HOLT HT-FP-004 Handbuch

CLEANING AND STORAGE

WARNING!
Before each cleaning or maintenance, remove the plug from the electrical socket.
Do not wash parts of the appliance (nozzles, graters, etc.) in a dishwasher.
• All plastic parts and accessories should be washed in warm water with a dishwashing detergent, then
rinsed and dried.
• Cutting metal accessories should only be washed in cold water to prevent premature blunting of the
blades. Then the metal nozzles must be wiped dry.
• It is recommended to wipe the body of the appliance with a damp cloth.
• Parts of the appliance (nozzles, bowls, etc.) that have direct contact with the food must be cleaned
every time a er using the appliance.
• If necessary, turn on the «protection from children» system by clicking on the button below on the
back of the body of the food processor.
Shelf life until implementation is unlimited.

TROUBLESHOOTING

Problem Cause
The appliance does 1. The appliance is not plugged
not turn on into the mains supply.
2. No electricity.
3. On/off button is not
pressed.
The appliance has 1. Overload of the bowl,
stopped working overload of grinding head
during use. with food, wound of fibers
around the feed screw.
2. Overheat of the motor.
Abnormal noise 1. Detachable parts are not
or strong fitted properly or not fixed.
vibration during
2. The appliance is mounted
operation of the
on an uneven or unstable
appliance
surface.
IMPORTANT! If none of the above measures resolve the problem, contact an authorized
service center.
CLEANING AND STORAGE
TROUBLESHOOTING
Solution
1. Plug the appliance to the mains supply.
2. Check fuse or circuit breaker.
3. Press the on/off button.
1. Unplug the appliance from the mains supply.
Disassemble the appliance. Free the bowl, the
grinding head from excessive amount of food, free
feed screw from the fibers, cut the food into small
pieces according to the instructions, if necessary.
2. Take a break from work and let the motor rest for
30 minutes.
Do not exceed the maximum continuous operating
time. When working with a large amount of food,
follow the interval between switching on/off the
appliance.
1 Unplug the appliance from mains supply and make
sure that the appliance is assembled properly.
2. Place the appliance on a flat hard surface.
25