HOLT HT-FP-004 Handbuch Seite 24

ASSEMBLY AND OPERATION
stops. You will hear a click. This means that the bowl is fitted properly.
• Attach the drive pin to the main bowl. Attach the filter on the drive pin (optional). The filter separates
the liquid/juice from the processed food.
• Fit one of the nozzles included in the set on the drive pin: multi-purpose blade, grater disc, kneading
nozzle, adjustable cutting disc
• Plug the food processor to the mains supply. Turn the speed switch in a clockwise direction, and then
return it to the «0» position. If the appliance did not start working, then most likely the appliance was
not assembled properly, and therefore the system of protection against incorrect assembly was
activated. Disassemble and assemble the appliance properly in accordance with this operation
manual.
Multi-purpose blade, graters, kneading nozzle, cutting disc:
Operation
• Prepare the food for processing: separate the food from the peel,
little bones, bones, cartilage, casings, tendons, etc. and cut into small
pieces - approximately 3 cm x 3 cm in cross section.
• Turn the speed switch clockwise to the desired level.
• Insert food in small portions into the lid funnel pushing it with the
main pusher.
• Operating time should not exceed 30-180 seconds. A er that let the
appliance cool down for at least 60 seconds.
• Turn the speed switch counterclockwise to the «0» position.
• For quick processing, use the «pulse» mode - turn the speed switch
counterclockwise to the «P» icon and hold it. At the end of processing,
return the speed switch to the «0» position
• Unplug the appliance from the mains supply.
Multi-purpose blade operation tips
1. Multi-purpose blade – is one of the most versatile nozzles for the
food processor. It is suitable for the processing and preparation of
confectionery and pies, raw and boiled meat, vegetables, fruits, nuts,
pate, sauces, mashed soups, etc.
2. The processing time of the food with this nozzle is determined by the
quality of the food structure, i.e. food with a coarser structure should
be processed longer than with so .
3. For chopping onions, use the «pulse» mode so that the onions are
not chopped too small and become mashed.
4. Chop fusible food (such as cheese or chocolate) for not too long,
because this type of food may lose its shape from the heat.
Kneading nozzle operation tips
1. Place dry ingredients (such as flour) in the main bowl.
23