Usb Interface - Feig Electronic VEK MNH1-R24-A Kurzanleitung

VEK MNH1-R24-A
The following parameters can be adjusted with the DIP switch:
DIP switch Position Value
Sense a ON
0.01% (high)
Sense b ON
Sense a OFF
0,04%
Sense b ON
Sense a ON
0,16%
Sense b OFF
Sense a OFF
0.64% (low)
Sense b OFF
OFF low
Frequency
ON high
OFF 5 minutes
Hold time
ON infinite
OFF Pulse signal
Output 2
ON Continuous signal
OFF on entering
Edge 2
ON on leaving
OFF inverted
Inv. Out 1
ON not inverted
OFF not inverted
Inv. Out 2
ON inverted
Tab. 9: Settings via DIP switch (single-channel)

4.4 USB interface

Detailed configuration and diagnosis of the detector data are possible via
the USB interface.
The free Detector Tool service program can be downloaded from the
customer area at www.feig.de. In addition, a computer and a USB cable
of the Mini-AB type are required.
VEK MNH1-R24-A QUICK START GUIDE 1.4 EN 4 | 4
SENSORS