salvus Torino Bedienungsanleitung Seite 13

1) Programming the "manager" code
- Enter (with open door) successively: "*", "ENTER", "1", "ENTER".
- Enter the standard code 1-2-3-4-5-6 followed by "ENTER".
- Enter the new six digit code, followed by "ENTER".
- Enter the new six digit code again for confirmation, followed by "ENTER".
Attention!
If the procedure is performed correctly, you will hear a double beep and the green LED flashes twice.
The factory code can no longer be used to open the safe. If something went wrong, the red LED
flashes thrice and the factory code remains active. Start again from the beginning.
2) Changing the "manager " code
- Enter (with open door) successively: "*", "ENTER", "1", "ENTER".
- Enter the current manager code followed by "ENTER".
- Enter the new six digit code, followed by "ENTER".
- Enter the new six digit code again for confirmation, followed by "ENTER".
3) Adding a "user" code
- Enter (with open door) successively: "*", "ENTER", "2", "ENTER".
- Enter the current manager code followed by "ENTER".
- Enter the new six digit user code, followed by "ENTER".
- Enter the new six digit code again for confirmation, followed by "ENTER".
4) Changing the "user" code
- Enter (with open door) successively: "*", "ENTER", "3", "ENTER".
- Enter the current user code followed by "ENTER".
- Enter the new six digit user code, followed by "ENTER".
- Enter the new six digit code again for confirmation, followed by "ENTER".
5) Removing the "user" code
- Enter (with open door) successively: "*", "ENTER", "2", "ENTER".
- Enter the current manager code followed by "ENTER".
- The user code has been removed.
V. Closing
Shut the door completely and turn the knob to the closed position until it locks.
Models with a handle lock automatically when the door is closed.
(see figure 2)
VI. Opening
Enter "*" and the manager code or user code, followed by "ENTER".
Turn the knob to open position or move the handle down.
13