salvus Torino Bedienungsanleitung Seite 11

Congratulations on your purchase of this Salvus quality product.
Please read this manual carefully before use.
I. Precautions
- Place your safe in a dry area only.
- Store your personal code in a secure place.
II. Fixing
For optimum safety, it is recommended to fix the Salvus Torino on a concrete floor. Please
use the supplied fixing hardware (see figure 1). In any other cases please ask your dealer about
fixing material (diameter 10mm) suitable for your floor type.
Figure 1: fixing bolt
• Choose a suitable and appropriate space to place your safe.
• Place the safe on the exact spot where you want to fix the safe.
• Check if the door opens and closes smoothly.
• Remove the shelf and remove the cap from the fixing hole.
• Mark the drilling location on the floor through the fixing hole.
• Move the safe and drill a hole in the floor with a diameter of 1 cm and a depth of
approximately 12 cm.
• Remove the dust from the drilling hole and clean the floor.
• Put the fixing bolt in the drilled hole and use a hammer to put it deeper.
• Remove the nut and washer.
• Put the fixing hole of the safe on the fixing bolt.
• Tighten the nut and washer securely with a suitable spanner.
• Check to ensure the safe is fixed.
User manual
Model : Torino
15cm
11