Connect IT CMO-2880 Serie Benutzerhandbuch Seite 5

ERGONOMIC OPTICAL MOUSE
USER MANUAL
CMO-2880 series
4 Troubleshooting
EN
4
When connecting a USB-A nano receiver:
 W e recommend connection this device straight to a USB port on your computer.
 I f this device is plugged in to a USB hub, make sure that the USB hub and the USB port to which it is connected can provide this
device and other devices connected to the same USB hub with enough power.
 A lternatively, we recommend using an external power source with the USB hub (if the USB hub supports such functionality).
Instructions for a non-functioning (unpaired) USB nano receiver:
1. Switch to 2.4 GHz by pressing the button on the bottom of the mouse.
2. Turn off the mouse and remove the unpaired USB-A nano receiver from the computer.
3. Place the unpaired USB-A nano receiver near the mouse, but do not plug it into the computer.
4. Turn on the mouse.
5. Press and hold the left, right, and middle buttons (scroll wheel) on the mouse simultaneously for 5 seconds.
6. The USB receiver will re-pair with the mouse.
7. Plug the receiver back into the computer.
CONNECT IT®️ is a registered trade mark R202112-IM-CMO2880