oneConcept Beaufort Bedienungsanleitung Seite 42

EN
42
(X) Setting
Switch between the display modes Temperature / Wind Chill Factor /
1
Dew Point
2
Switch between the temperature display in ° C and ° F
High temperature alarm: Use +/- and ON/OFF to set the temperature
3
at which an alarm sound should be emitted. When the alarm is active,
a corresponding icon is shown on the display.
4
Low temperature alarm
Display of the highest outdoor temperature measured so far
5
(flashing). Press and hold the display for 3 seconds to return to the
normal display.
Display of the lowest outdoor temperature measured so far (flashing).
6
Press and hold the display for 3 seconds to return to the normal
display.
(X) = The number of times the display must be tapped to access the
corresponding settings
Outdoor temperature