Products Installation Diagram - Wintec MR-200 Bedienungsanleitung

This product is built-in driving passenger intercom function, with cable kit as
below.
Main cable
(Passenger)
*This product is built-in external audio input, you can use 3.5mm audio
terminals.
3.5mm audio cable please use the original cables to avoid noise interference.

Products Installation Diagram

Drive Control
(Power and Volume)
Main cable(Passenger)
Passenger Control
(PTT and Volume)
Power connection diagram
(+) Positive Ignition power supply or battery, etc.
(-) Negative overlapping vehicle
Figure find Ignition start power terminals or battery.
PTT extension cable
Antenna mount installation diagram
Helmets Headset
Main cable (Drive)
Antenna Installation 90 degrees
perpendicular to the ground, in
order to achieve better receiving
effect.
9