Wintec MR-200 Bedienungsanleitung Seite 19

Drive Headset Connector
5
Drive headset connector with Power ON / OFF, PTT, Volume Control.
Power In (DC12V)
6
DC Power in 13.8V
Freq / CH
7
Show current channel frequency.
P / Lock
8
Shot press: Selector CTCSS code 1~51.
▲UP Key
9
Channel up and at setting manual mode is selector.
DOWN Key
10
Channel down and at setting manual mode is selector.
Backlight / Power
11
Shot press: Backlight on / off
Press and hold: Power on / off
SET
12
Shot press: In to the setting manual mode.
Press and hold: Back main manual.
LCD
13
Displays the current status of MR-200.
8
9
2