Using The Twist Lock Blending Arm - KitchenAid 5KHBC212 Bedienungsanleitung

OPERATING THE HAND BLENDER

Using the Twist Lock Blending Arm

1. Insert Blending Arm attachment into
motor body with the alignment mark
facing the back of the unit, and twist
to lock. The alignment mark on the
attachment should line up with the
mark on the body.
2. Plug the electrical cord into an electrical
wall socket.
3. Set Hand Blender to Low
or High speed.
4. Insert the Hand Blender into the
mixture.
12
NOTE: Hand Blender should only be
immersed in liquids the length of the
attachment. Do not submerge beyond
the seam of the blending attachment.
Do not immerse the motor body into
liquids or other mixtures. To avoid
damaging blades or mixing container,
do not touch the blade to the bottom of
the mixing container or use in a mixing
container that has protruding parts that
can go under the metal guard.
5. Press the Lock Switch to unlock the
Hand Blender.
6. Press the Power button to activate
the Hand Blender.
7. When blending is complete, release
the power button before removing
Hand Blender from the mixture.
8. Unplug immediately after use, before
removing or changing attachments.
For best results, insert Hand Blender with
Blending Arm attached into the pot or bowl
containing ingredients at an angle. Use your
free hand to hold the pot or bowl or hold
the Hand Blender near the base of the
motor unit for better stability. Remember
to stop the Hand Blender before removing
it from the pot or bowl to avoid splashing.
Blending