Bartec 07-7331-2307/0000 Betriebsanleitung Seite 17

Operation Instruction (Translation)
11. Maintenance, Inspection, Repair
Only authorised and qualified personnel may do any work on the
control and regulating component.
Maintenance
If operated correctly in accordance with the installation instructions
and ambient conditions, it does not require maintenance.
Inspection
Under EN/IEC 60079-17 and EN/IEC 60079-19 the owner/
managing operator of electric installations in hazardous areas is
obliged to have these installations checked by a qualified
electrician to ensure that they are in a proper condition.
Repair
The component must not be repaired. Please contact BARTEC
GmbH if you have any questions.
12. Disposal
The regulating and control components contain metallic and plastic
parts and electronic parts.
WEEE-Reg.-No. of the BARTEC GmbH:
DE 95940350
Our devices involve electrical equipment which is only
intended for commercial use (so-called B2B equipment in
accordance with the WEEE Directive).
The regulating and control components must be disposed
of in accordance with national regulations.
Our customers may return any products procured from us
to our company for disposal. The sender must bear the
costs for shipping/packing.
Max-Eyth-Straße 16
DE
97980 Bad Mergentheim
GmbH
Deutschland
MODEX
Regulating and control components
PROFIBUS-Interface 4 x RTD in Ex
Tel.: +49 7931 597-0 info@bartec.de
Fax: +49 7931 597-119 www.bartec.de
i
13. Amendments to the Document
In cases of doubt the German safety instructions apply because it
is not possible to rule out errors during printing and translation. The
"General Terms and Conditions of Business" of the BARTEC
Group moreover apply in the event of legal disputes.
The current version of data sheets, operating instructions,
certificates and EC declarations of conformity can be downloaded
from www.bartec.de or directly requested from BARTEC GmbH.
14. Order Numbers
PROFIBUS Interface
15. Service Address
BARTEC GmbH
Max-Eyth-Straße 16
97980 Bad Mergentheim
GERMANY
Phone +49 7931 597-0
Fax +49 7931 597-119
E-Mail: info@bartec.de
Internet: www.bartec.de
Vorbehalt Technische Änderungen behalten wir uns vor.
Änderungen, Irrtümer und Druckfehler begründen
keinen Anspruch auf Schadensersatz.
Typ 07-7331-2307/0000
4 x RTD in Ex i
Order no.
07-7331-2307/0000
7/18