Balluff BOS 5K RH12 Serie Kurzanleitung Seite 4

Connections
N.C. Pin 2,
dark-on
N.O. Pin 4,
light-on
Fig. 3: Connection diagrams
Pin Dark-on
1 10...30 V DC
2 N.C.
3 0 V
4 nc
Fig. 4: Pin assignments (nc = not connected)
Setting
1. Position the sensor at the desired distance.
2. Turn the potentiometer counter clockwise (shortest
range) so that the yellow LED turns off.
3. Place the target inside the beam path.
4. Turn the potentiometer slowly clockwise
(there may be more than 1 turn) until the
yellow LED turns on. The object is now detected
(position a).
5. Remove the target: The yellow LED turns off.
6. Continue turning the potentiometer clockwise (there
may be more than 1 turn) until the yellow LED turns
on: The background is detected (position b). If no
background is detected, position b overlaps with the
max. setting.
7. Turn the potentiometer to the middle position c
between a and b. The sensor is now ready.
Technical Data
Optical
Operating distance
Emission type
Electrical
Supply voltage U
No-load current I
Effective operating current I
Voltage drop U
On-/off delay
Switching frequency f
Output dep. on model
Short circuit protected
Polarity reversal protected
Interference protected
Output function dep. on model
BGS and range setting
Mechanical
Connection type
Light-on
10...30 V DC
Housing material
nc
Active surface material
0 V
Display material
N.O.
Housing dimensions
Weight
Displays
Output function indicator
Ambient
Ambient temperature T
Enclosure rating per IEC 529
B
O
e
at I
d e
Cable version
Connector version
Cable version
Connector version
a
Balluff GmbH
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Germany
Phone +49 (0) 71 58/1 73-0
Fax +49 (0) 71 58/50 10
E-Mail: balluff@balluff.de
!
40...200 mm
red light
10...30 V DC
< 30 mA
100 mA
< 2 V
1 ms
500 Hz
PNP or NPN
yes
yes
yes
Light-/dark-on
6-turns potentiometer
M8 connector
or cable 2 m
PC/PBT
PC
PC
31.5 x 19.5 x 10.8 mm
42.3 x 19.5 x 10.8 mm
40 g
10 g
yellow LED
-25 to 55 °C
IP 67
www.balluff.com
4