Herunterladen Diese Seite drucken

Balluff BOS 5K RH12 Serie Kurzanleitung Seite 3

Optosensoren; lichttaster mit hintergrundausblendung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Optosensors
Diffuse reflectiv with background supression BOS 5K-..-RH12-
No. 851 227 E • Edition 0611
Safety Notes
These photoelectric sensors may not be used in
applications where personal safety depends on
proper function of the devices.
The CE Marking confirms that our products
conform to the EC Directives 89/336/EEC (EMC)
and the EMC Law.
In our EMC Laboratory, which is accredited by the
DATech for Testing of Electromagnetic Compatibility,
proof has been documented that these Balluff products
meet the EMC requirements of the following harmonized
standards:
- EN 50 081-2 (Emission) and
- EN 50 082-2 (Noise Immunity)
Indicators and displays
Yellow LED
Output function indicator (receiver only): The LED comes
on as soon as the output is active.
Potentiometer 6-turn adjuster
Used for setting the background supression (BGS)
respectively range of the receiver.
1 LED yellow: Output function indicator
2 Poti: BGS respectively range setting
Fig. 1: Displays and controls
3
Diffuse reflective with connector
BOS 5K-PS-RH12-S75
BOS 5K-PO-RH12-S75
BOS 5K-NS-RH12-S75
BOS 5K-NO-RH12-S75
Diffuse reflective with cable
BOS 5K-PS-RH12-02
BOS 5K-PO-RH12-02
BOS 5K-NS-RH12-02
BOS 5K-NO-RH12-02
PNP
Light-on
PNP
Dark-on
NPN
Light-on
NPN
Dark-on
PNP
Light-on
PNP
Dark-on
NPN
Light-on
NPN
Dark-on
Installation
- The installation location must be free of vibration,
dust, poisonous vapors, water, oil and chemicals.
- The sensor may not be installed outdoors and not
next to inductive devices or heat sources.
- The sensor may not be exposed to direct sunlight or
other direct light.
- Max. tightening torque for the screws is 0.5 Nm.
- The max. cable length is 100 m with a conductor
cross-section of 0.3 mm
2
.
- Do not route the connection cable parallel to high-
voltage and motor cables.
- Do not exceed a tightening torque on the connector
securing ring of 0.5 Nm.
Connector version
Cable version
Fig. 2: Dimensions
N.O. (Pin 4)
N.C. (Pin 2)
N.O. (Pin 4)
N.C. (Pin 2)
N.O.
N.C.
N.O.
N.C.
a Receiver axis
b Emitter axis

Werbung

loading

Diese Anleitung auch für:

Bos 5k-ps-rh12-s75Bos 5k-po-rh12-s75Bos 5k-ns-rh12-s75Bos 5k-no-rh12-s75Bos 5k-ps-rh12-02Bos 5k-po-rh12-02 ... Alle anzeigen