Star Progetti VARMATEC RADIO 550/20NR Gebrauchsanleitung Seite 15

2
Take the radio remote control unit cod. PTVTEL:
•
Within 10 seconds use the "+" and "-" buttons to select the channel [1-12] selected for
assignment. Example «channel 1» Fig.6
•
Immediately afterwards press the button as shown in Fig. 7.
•
The blue LED on the heater goes out to confirm that the storage operation is complete.
Fig.8
N.B. If programming does not work, repeat programming
Fig.6
STORAGE OF 1 REMOTE CONTROL FOR UP TO 12 HEATERS
ALWAYS CARRY OUT OPERATIONS WITH ONLY ONE HEATER CONNECTED WITH
3
Take the radio remote control unit cod. PTVTEL:
•
Repeat the operations of the previous chapter by selecting the channels of your choice
[1-12].
•
All heaters can also be assigned to the same channel.
•
It is also possible to form groups of heaters by creating heating zones.
YOU CAN STORE A MAXIMUM OF THREE RADIO REMOTE CONTROL UNITS
PLUS A PIR OR ONLY FOUR RADIO REMOTE CONTROL UNITS
Fig.7
MAINS VOLTAGE.
15
Fig.8
CHANNEL13