User Interface; Menu Navigation - Western Co WRD Benutzerhandbuch

3. USER INTERFACE

3.1. Menu Navigation

Navigating through the various screens is very simple and intuitive. The WRD has two display environments (Pic.3):
- the main environment MAIN, consisting of six screens where the operation of the system is monitored;
- SETUP setting environment, consisting of 6 screens + 6 in ADV. SETUP where the settings for the
operation are set.
In the MAIN environment, the
6.0, the ENTER button accesses any submenu. Pressing the
sec. you access the SETUP environment. Here, it is always repeated with the same
the scrolling of the screens from 7.0 to 7.5. To return to the MAIN environment use the
for 1 sec. To enter ADV. SETUP select the "Advanced Setup" item on the 7.5 OTHERS screen, press the
botton so that "-->" appears and then press the
1.0
MAIN A
7.0
SYSTEM
8.0
WBUS CONFIG
---
DOWN
NAVIGATION MODE
ESC
GO INTO SETUP
ESC EDIT
DEC
> EDIT MODE <
User manual
UP and DOWN buttons are used to scroll through the screens from 1.0 to
2.0 3.0
MAIN B VARIABLES
7.1 7.2
DATE/TIME DATA LOGGER
8.1 8.2
WBM WRMxx
Pic.3 - Navigation Menu
---
UP
EDIT
SELECT
INC
OK
SAVE
WRD
UP/DOWN buttons simultaneously for 1
OK button for 1 sec.
MAIN
4.0
PV STRINGS
SETUP
7.3
NETWORK
ADV. SETUP
8.3
W-INVERTER
It is possible to enter the EDIT mode (Pic.4), where it is
allowed, to modify the parameters by keeping pressed the
.
EDIT button for 1 sec. Entry into the EDIT mode is visible on
the display by the presence of the cursors on the modifiable
parameter. For editing are used the
buttons, press the
For save the changes the button
pressed for 1 sec. To exit the EDIT mode, without saving the
changes, use the
that require an action, press the
Pic.4 - Editing mode
5
UP or DOWN buttons,
ESC button pressed
5.0 6.0
ENERGIES LOG.EVENTS
submenu
7.4 7.5
INFO OTHERS
8.4 8.5
WRD CAR CHARGER
SELECT button to change the value.
SAVE must be kept
ESC button. To confirm the items
OK button for 1 sec.
EN
UP
, INC/DEC