•
Mount the hood by inserting the hooks of the mounting bracket into the corresponding grooves
of the mounting bracket.
•
Tighten 2 screws on each bracket.
•
Lift the pipe to the ceiling and tighten 2 screws (Figure 9).
•
Check that the hood is securely in place, insert the cable and connect it to an earthed power
supply through the socket.
OPERATING THE COOKER HOOD
•
The ROLL extractor hood has 4 ventilation speeds. Depending on the amount of steam and haze
when cooking, you can choose a low, medium or high ventilation level.
•
Switch the extractor hood on in the desired mode before cooking. It is recommended to
continue the work of the extractor hood for 3-5 minutes after cooking so that the air in the
kitchen is freed of evaporation residues and odors.
•
The switch for the operating modes of the motor and the lighting slats is located on the housing
of the extractor hood (Pic. 5).
1 - Light on / off
2 - Fan on / off
3 - Speed increase
4 - Speed reduction
Control via remote control:
•
To switch on the hood, press button 1, 4 or 5. To switch off the hood,
press button 1.
•
To increase or decrease the operating speed, press the 5 or 4 button.
•
Press button 2 to switch the light on or off.
•
To activate the timer, press button 6 with the hood switched on.
•
To switch off the timer, press the button 6.
Pic.5