Vlano ROLL Black Handbuch Seite 28

EXTRACTOR HOOD DESCRIPTION
The ROLL extractor hood is an air cleaning device with a cross-flow fan (turbine) and a grease-absorbing 8-
layer aluminum filter. The product is manufactured in a 360-degree single-motor design from carbon steel
with a decorative powder protective coating.
The hood type is "island" and is mounted in the kitchen above the stove on the ceiling.
Depending on the installation scheme, the hood works in two versions (see p. 1.5):
• in exhaust air mode in the kitchen fireplace (Fig. 1);
• in recirculation mode (closed air circulation in the kitchen) (Fig. 2).
Caution! The extractor hood should be mounted on the ceiling at a distance of 650-750 mm above an electric
stove and at a distance of 750-850 mm above a gas stove.
Distance H:
To electric cooker 65 - 75 cm
To gas cooker 75 - 85 cm
The cooker hood consists of the next components (Pic.3):
1 - Adapter Ø150 / Ø120 mm
2 - Housing
3 - Control Panel
4 - Aluminum Filter
5 - LED lamps
6 - Power Cord
Pic. 1