The LIGHTFOOT
The P77STFLRB and P77HTFLRB active standard and high temperature flexible long reach solder-in tips come with LIGHTFOOT
handle, clip, and adhesive tape accessories to help you more easily position the tips. The flexible tip allows for maneuverability of
placement.
Use the handle to place the tip
1. Use the handle to hold the tip in place for wire threading and trimming. The handle uses a swivel lock and can be placed in either
side-wing on the tip.
2. Use liquid adhesive to secure the handle as needed. If you do not need the handle, remove it once you have placed the tip. (See
emiuv.com
for adhesives.)
3. The flexible holding tabs (sides) of the clip provide strain relief. This allows you to secure the clip to the long body of the tip. You can
use a liquid adhesive beneath the clip to secure the tip to the DUT.
TM
kit quick setup
TM
The LIGHTFOOT
kit quick setup
TM
9