Herunterladen Diese Seite drucken

tempLED RayProof Pro 25 Montageanleitung Seite 6

Werbung

MONTAGEANLEITUNG
tempLED RayProof Pro Serie
Elektrischer Anschluss
Schritt 10:
Netzkabel einführen
Fädeln Sie die Mutter und je nach
Kabeldurchmesser auch den schwar-
zen Dichtring auf das Netzkabel auf
und führen Sie das Netzkabel durch die
PG-Verschraubung.
Hinweis: das dickere Ende des schwar-
zen Dichtrings muss nach innen
zeigen.
Schritt 11a:
Klemmblockbelegung
bei Leuchten ohne Dimmung
Verbinden Sie das Netzkabel mit dem
Klemmenblock gemäß der Beschriftung
auf dem Klemmenblock:
Phase [1] - braun
Schutzleiter (Erdung) - gelb/grün
Neutralleiter [N] - blau
Zusatzleiter [2/3] - schwarz/grau
Schritt 11b:
Klemmblockbelegung
bei Leuchten mit DALI-Dimmung
Verbinden Sie das Netzkabel mit dem
Klemmenblock gemäß der Beschriftung
auf dem Klemmenblock:
Phase [1] - braun
Schutzleiter (Erdung) - gelb/grün
Neutralleiter [N] - blau
DALI [2] - schwarz
DALI [3] - grau
Durchgangsverdrahtung / through-wiring
3
Durchgangsverdrahtung / through-wiring
3
© tempLED GmbH
|
Marmorwerkstraße 52
info@tempLED.de
|
www.tempLED.de
10
11
N
1
2
11
N
1
2
|
83088 Kiefersfelden
|
WEEE-Reg.-Nr.: DE 26163456
V.01/2021
INSTALLATION GUIDE
tempLED RayProof Pro series
Electric power connection
Step 10:
Feeding in the power cable
Thread the nut and, depending on
the cable diameter, also the black
sealing ring onto the power cable and
feed the power cable through the PG
connection.
Please note: The thicker end of the
black rubber sealing ring has to point
towards the inner side of the luminaire.
Step 11a:
Terminal block wiring
for luminaires without dimming
Connect the power cable to the termi-
nal block according to the labeling on
the terminal block:
Power conductor [1] - brown
Protective conductor - yellow/green
Neutral conductor [N] - blue
Additional conductors [2/3] - black/grey
Step 11b:
Terminal block wiring
for luminaires with DALI dimming
Connect the power cable to the termi-
nal block according to the labeling on
the terminal block:
Power conductor [1] - brown
Protective conductor - yellow/green
Neutral conductor [N] - blue
DALI [2] - black
DALI [3] - grey
|
Deutschland

Werbung

loading