Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT: The oven produces hot air or steam during the cooking processes. Take great
care when you open the door.
The electric power cable of the appliance must not be replaced by the user. It must only be
replaced by a qualified electrician.
Never line the oven with aluminium foil. It could block the slots and prevent regular heat
exchanges from taking place, consequently damaging the enamelled surface.
Before you start using the oven for cooking, you must remove the protective film from the
oven door and heat the empty oven at maximum temperature for about (this will
eliminate the odours and fumes created by manufacturing residues). After this, the oven
must be thoroughly cleaned with soapy water and rinsed well, but do not use too much
water as this could penetrate and damage the internal components.
Always call an authorized Technical Assistance Center and insist on original spare parts if
repairs are required. Repairs made by incompetent persons could cause damage.
The appliance is conform to the following European Directives and Regulations :
(CE) 1275/2008 Regulation on electricity consumption in stand-by and off modes
Directive 2005/32 / EC / Electric consumption in stand-by and off functions
Directive 2014/35/EC
Directive 2014/30/EC
Directive 2012/19/EC
Directive 2009/125/EC
Directive 2011/65/EC
Regulation 1935/2004/EC ( Materials intended to come into contact with food )
Regulation 1907/2006/EC ( REACH –Restriction of Chemicals )
( Low Voltage Appliances )
( ElectroMagnetic Compability )
( WEEE - Waste Electrical and Electronic Equipment )
( ErP - Eco Design )
( RoHS - restriction of hazardous substances)
5
Werbung
Inhaltsverzeichnis
