Troubleshooting; Corrective Action - Anycom HCC-250 Bedienungsanleitung

Troubleshooting

In case the Car-Kit does not function correctly, please follow the corrective action given in the table below. If the problem is not solved even after performing the
corrective actions, please contact the dealer from whom Car-Kit was purchased.
Status
Car-Kit does not turn on
Unable to communicate using Car-Kit
Unable to pair Car-Kit with a Bluetooth
mobile phone
Extremely low or loud speaker volume
Page 11
To Check
Check whether the battery of Car-Kit is
charged
Check whether your mobile phone
supports the "headset" and/or
"hands-free" profile(s)
Check whether the battery is fully
charged
Check whether Car-Kit is on
Check whether Car-Kit is in the pairing
mode
Check the speaker volume
HCC-250 - English

Corrective Action

Charge the battery
In order to use the Car-Kit, it is essential that your mobile phone
should support the "headset" and/or "hands-free" profile(s)
(You might need to search for option such as headset, audio device,
etc in case your mobile phone does not contain the hands-free option;
these options however are subject to the model of the mobile phone
being used)
Charge the battery if the battery power is low
Press for 3 s to turn on Car-Kit
With power off, press and hold
the pairing mode
Press either + or - to control the volume accordingly
for at least 6 s to place Car-Kit in