Volume Adjustment; Pairing/Connecting Your Handsfree With Other Bluetooth Device; Quick User Guide; Led Indicator Patterns - Anycom HCC-250 Bedienungsanleitung

2.6.2 AVRCP Operations
The following operations can be used for remotely control your Bluetooth capable phone or media player to play music:
Play: Press button
Pause: Press button
Stop: Press and hold button
Forward: Press and hold button + for at least 3 seconds.
Backward : Press and hold button – for at least 3 seconds.

2.7 Volume Adjustment

When in the connected or talk/play mode, you can adjust sound volume up or down by pressing buttons + or – , respectively. You can repeat the above operation
until the speaker volume reaches at a desirable level.
Note:
For most Bluetooth volume control of the Car-Kit will synchronize with the phone. That is, the sound volume of your HCC-250 can be controlled by your phone
and vice versa. However, this may not be always true due to variations on implementations chosen by different phone manufactures.

2.8 Pairing/Connecting your Handsfree with Other Bluetooth Device

In addition to Bluetooth phone, your Car-Kit can also pair with other Bluetooth devices for realizing short distance wireless communications. Similar pairing
procedures described in the previous Section 2.4 can be used. You can also follow the user guide of the Bluetooth device to complete paring operations on the
device side.
This Car-Kit can be paired with up to 8 Bluetooth devices (including mobile phones). The corresponding 8 sets of pairing information are recorded by the Car-Kit.
Each paired device can wireless communicated with the Car-Kit after setting up a Bluetooth connection. Please check Section 2.4.3 on procedures to set up a
Bluetooth connection.
3. Q U G
UICK SER

3.1 LED Indicator Patterns

LED Pattern 1: Blue LED gives 1 blink per 3 seconds; Red LED is off.
LED Pattern 2: Blue LED gives 3 quick blinks per 2 seconds; Red LED is off.
LED Pattern 3: Blue and Red LEDs alternate continuously.
LED Pattern 4: Blue and Red LEDs alternate every 3 seconds.
LED Pattern 5: All LEDs are off.
.
.
for at least 3 seconds.
UIDE
Page 7
HCC-250 - English