Medion MD 87269 Bedienungsanleitung Seite 67

3) Gradually change the position of the camera
4) Move the camera continuously up/down or
left/right
5) Show information/switch on infrared light (for
recording at night)
6) Mirror the camera image horizontally/vertically
7) Switch the alarm signal on/off (when an alarm
system is connected via the I/O connection)
8) Adjust the video frequency to 50/60 Hz
9) Set the resolution (VGA 640x480 or 320x240
pixels)
10) Adjust the recording rate from 5 to 25 fps (im-
ages per second)
11) Adjust the bitrate from 128 to 3990 kbps (kilo-
bytes per second)
12) Set the brightness
13) Set the contrast
14) Set the saturation
15) Set the chroma (exposure)
16) Call up - call up the camera configuration
17) Standard
18) Recording settings - enter the storage location
for videos/photos
19) Device list
20) Signed in/signed off cameras (green/yellow)
68 of 204