Mounting The Ip Camera Without The Stand; Connecting The Mains Adapter - Medion MD 87269 Bedienungsanleitung

 Attach the IP camera to the wall via the mount us-
ing the two screws (2) supplied.
7.2. Mounting the IP camera
without the stand
You can also mount the IP
camera without the stand.
 Drill two holes with a
spacing of 6 cm and in-
sert the wall plugs into
the holes.
 Screw the screws into
the wall plugs until the
heads slightly protrude from the holes.
 Place the recesses on the underneath of the IP
camera over the screw heads and then slide the IP
camera downwards so that the camera is held se-
curely in place.

7.3. Connecting the mains adapter

 Connect the sup-
plied mains adapt-
er (model: FJ-
SW1260502000DE
for EU or FJ-
SW1260502000DB
for UK, manufacturer:
Shenzhen Fujia Ap-
pliance CO., LTD) with
56 of 204