Makita GA039G Betriebsanleitung Seite 23

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
• When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
piece causing poor control.
• When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
•
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
► Fig.40
-
1
2
3
4
5
6
7
8
9
10
NOTE: *1 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *2 Clip-on cutting wheel guard attachment is not available in some countries such as Korea, Taiwan, and
mainland China. For more details, refer to the instruction of the clip-on cutting wheel guard attachment.
Application 100 mm (4") model
-
-
Grinding / Sanding
-
Cutting-off
Wire brushing
Wire brushing
-
-
Cutting-off
Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.38: 1. Exhaust vent 2. Inhalation vent
Remove the dust cover attachment from inhalation vent
and clean it for smooth air circulation.
► Fig.39: 1. Dust cover attachment
NOTICE:
Clean out the dust cover attachment
when it is clogged with dust or foreign matters.
Continuing operation with a clogged dust cover
attachment may damage the tool.
115 mm (4-1/2") model
Side grip
Wheel Guard (for grinding wheel)
Depressed center wheel / Flap disc
Wheel Guard (for cut-off wheel) *1
Abrasive cut-off wheel / Diamond wheel
-
Wire cup brush
Clip-on cutting wheel guard attachment *2
Dust collecting wheel guard for cutting-off
Diamond wheel
23 ENGLISH
125 mm (5") model
Wire wheel brush