Adjusting The Directional Movement; Using Multiple Quad Bikes - THINK GIZMOS TG935 SPEED MASTER QUAD BIKE V2 Bedienungsanleitung

2.3 Adjusting the Directional Movement

● It may be necessary to fine tune the steering via
the steering adjustment control, located on the
underside of the Quad Bike.
If while travelling in a straight line you find that
●
the Quad Bike strays to the left or right, then
you will need to adjust the steering control to
correct this issue.
●
It is best to make several small adjustments
to the steering this allows for an accurate
adjustment of the steering.
●
If the Quad Bike strays to the left, then you will
need to move the steering adjustment to the
right (R).
●
If the Quad Bike strays to the right, then you will
need to move the steering adjustment to the
left (L).

2.4 Using Multiple Quad Bikes

The TG935 Remote Control Quad Bike uses the 2.4ghz frequency, this means multiple cars
can used at the same time.
●
Load the batteries in the controllers and Quad Bikes.
●
Make sure to connect one car and remote at a time.
●
Switch on the power of the Controller A and the Quad Bike A you want to control.
●
Wait 10 seconds for the car and controller to connect.
●
Switch on the power of the Controller B and the Quad Bike B you want to control.
●
Wait 10 seconds for the car and controller to connect.
●
Repeat for any extra cars and controllers you may have.
Steering Adjustment
7
Control