Herunterladen Diese Seite drucken

Instructions Part; Adjusting The Directional Movement; Troubleshooting - THINK GIZMOS TG541 Bedienungsanleitung

Turbo speed awesome r/c truggy

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8

4. INSTRUCTIONS PART 3

4.1 Adjusting the Directional Movement

It may be necessary to fine tune the steering via
the steering adjustment control (20), located on
the underside of the Truggy.
If while travelling in a straight line you find
that the Truggy strays to the left or right then
you will need to adjust the steering control to
correct this issue.
It is best to make several small adjustments
to the steering this allows for an accurate
adjustement of the steering.
If the Truggy strays to the left then you will
need to move the steering adjustment to the
right (R).
If the Truffy strays to the right then you will
need to move the steering adjustment to the
left (L).

4.2 Troubleshooting

If you are experiencing problems with your Truggy, here are some quick and easy checks
that you can carry out, which may help to resolve the problem.
No Response from the Truggy:
Please ensure that the Truggy is in range of the controller and that there is no
obstructions between the controller and the Truggy which could block the signal.
Make sure that the batteries in the Pistol Grip Controller are fitted correctly and that they
have not reached the end of their life. If required replace the batteries in the controller.
Make sure that the batteries in the Truggy are fitted correctly. If required replace the
batteries in the Truggy.
Please ensure that the power switch on the Truggy and Pistol Grip Controller is switched
to 'ON'.
Make sure that the antenna is correctly and securely fitted to the Pistol Grip Controller.
The Truggy does not travel straight:
Please adjust the steering using the steering adjustment control located on the
underside of the Truggy.
The Truggy Starts to Run Slow:
The batteries in the Truggy are running low, please insert new batteries.
6

Werbung

loading