Quad Bike Battery Installation; Remote Battery Installation - THINK GIZMOS TG935 SPEED MASTER QUAD BIKE V2 Bedienungsanleitung

1.3 Quad Bike Battery Installation

●
Turn the Quad Bike over so that you can gain access to the underside of the vehicle.
●
Making sure that the Power switch is in the OFF position, remove the screw from the battery
cover and remove the battery compartment cover.
● Insert 4x AA batteries (supplied) into the battery compartment observing the correct
polarity as indicated.
● Re-fit the battery cover and secure with the screw.
(Warning - Remove the batteries if the Quad Bike is not going to be used for a long time.)

1.4 Remote Battery Installation

●
The battery compartment is located on the side
of the pistol grip controller.
●
Remove the battery compartment cover from
the controller.
Insert 2 AA batteries (supplied) into the battery
●
compartment observing the correct polarity as
shown and replace the battery compartment
cover.
WARNING
Do not mix old and new batteries.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in a fire.
Remove the batteries if the Quad Bike is not going
to be used for a long time.
4