Atag WU50311BM Anleitung Seite 42

USE
EN 6
Switching the lighting on and off
1. Touch the lighting key.
The lighting key lights up.
The lighting switches on.
2. Touch the lighting key again.
The lighting switches off.
Switching on the timer
1. Switch on the cooker hood at speed 1, 2 or 3.
2. Touch the timer key.
The timer key flashes and a single beep sounds.
The timer for the motor is activated; after 10 minutes the cooker
hood switches off.
Touch the timer key to stop the timer at any time.
Switching on Clean Air function
1. Touch the on/off key and the desired speed setting key 2, 3 or the
timer key (for speed 1) at the same time.
The corresponding key lights up.
2. Then, within 5 seconds, touch the on/off key again.
The Clean Air function is activated.
The cooker hood will be switched on for 10 minutes every hour for
the next 24 hours.
The speed setting key flashes while the extraction is active.
After 10 minutes, the cooker hood switches off automatically.
The Clean Air function cannot be used when the intensive setting is
selected.
Grease filter cleaning indicator
After 100 hours of use of the cooker hood, a beep sounds periodically
during use. The on/off key flashes continuously when the cooker hood
is switched off. The grease filter must be cleaned.
• To reset the cleaning indicator, touch the on/off key twice with the
cooker hood switched off.
You will hear a confirmation beep for 3 seconds.
After 20 hours, the filter cleaning indicator automatically resets.