Troubleshooting; Failure; Power Station; Warnings - Rosenbauer RTE PS 2 Power Station Betriebsanleitung

Troubleshooting

Failure

18 Troubleshooting
18.1 Failure
18.1.1

Power Station

Error
Consumers are not
supplied
The battery is not
beeing charged
Overcurrent protec-
tion is triggered
Main switch flashes

18.2 Warnings

74 / 78
If problems or repairs can not be clearly identified or solved please contact
the customer service department or your Rosenbauer representative.
Cause
Main switch is off
Outputs are off
Charge state < 5 %
Incorrect charge parameters
Starting power of consumer
too high
Overcurrent protection or
short-circuit protection is trig-
gered
Fault
► Actuate fault switch to change to the fault overview screen.
The fault overview screen appears.

The fault overview screen shows actual fault information.
Unread faults are displayed in orange.

Remedy
Switch on main switch
Switch on outputs
Charge the rechargeable battery
Check input parameter (e. g. charging
voltage)
Use suitable charging devices
Select consumers with lower power rate
Restart Power Station
Check consumers
Select consumers with lower power rate