Display - Rosenbauer Rte Ps 2 Power Station Betriebsanleitung

Operation
Operation
16.3.1

Display

64 / 78
HINWEIS
Switching off the Power Station due to high starting currents!
When starting consumers, high starting currents may occur which triggers
the over-current protection of the Power Station. The respective output of
the Power Station will be switched off.
Select consumers with lower power rate.

Troubleshoot and restart the Power Station.

If the Power Station switches off repeatedly, stop using the Power

Station immediately and contact costumer service.
Check on first start-up. See chapter "Settings".
Avoid direct sunlight to the display.
Inputs to the display are acknowledged by an acoustic signal.
Main overview screen
The main overview screen shows the following information:
• Actual charge state of the battery
• Actual charging capacity (AC and DC)
• Actual output (AC and DC)
• Date and time
Settings
► Actuate settings switch to change to the settings overview screen.
The settings overview screen appears.

The following settings are made in the settings overview screen:
• AC ouptut voltage
• AC output frequency