Switch On Power Station; Activate And Deactivate Outputs - Rosenbauer Rte Ps 2 Power Station Betriebsanleitung

•
•
•
•
•
Data
►
The data overview screen shows the following information:
•
•
•
•
Fault
►
The fault overview screen shows actual fault information.

16.3.2

Switch on Power Station

►
►


Do not feed into vehicle power system.
16.3.3

Activate and deactivate outputs

►
Activate AC outputs
►


DC charge source
ECO Mode
Language
Buzzer setting
Date and time
Actuate data switch to change to the data and information overview
screen.
The data overview screen appears.

Product information (model, software-versions)
Charge information (AC and DC)
BMS information
Error memory
Actuate fault switch to change to the fault overview screen.
The fault overview screen appears.

Unread faults are displayed in orange.
Transport Power Station to the scene of emergency.
See chapter "Transport".

Actuate Main switch switch.
The LED integrated in the switch illuminates green.
The Power Station is ready for operation.
Switch on Power Station.
See chapter "Switch on Power Station".

Actuate AC on/off switch to activate the alternating current outputs of
the Power Station.
The alternating current outputs are activated.

Connect devices to the alternating current outputs.
The actual output power is shown at the display AC output on the
screen.
Operation
Operation
DE
EN
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
65 / 78