Herunterladen Diese Seite drucken

Livington Cool2Go Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Instructions for Use
IMPORTANT INFORMATION
AND SAFETY INSTRUCTIONS:
• Keep the device away from liquids and DO
NOT immerse it in them.
• DO NOT wear the device in wet or damp
areas. Only use in dry locations.
• DO NOT attempt to remove or replace the
built-in battery.
• DO NOT use near naked flames or sources
of fire.
• DO NOT use solvents or alcohol for
cleaning.
• Only use the original USB cable included
in the delivery contents.
• DO NOT insert any foreign objects into the
device.
• The device should only be used by children
aged 8 years and over, as well as by
persons with reduced physical, sensory
or mental abilities or lack of experience
and knowledge, if they are supervised or
have been instructed on the safe use of
the device and understand the dangers
associated with its use.
• Children are not allowed to play with the
device.
CHARGING (#2, #3, #4)
Important information: your Livington Cool2Go
is not fully charged - for best results, fully
charge it before first use.
NOTE: Once your Livington Cool2Go is fully
charged, you can expect - depending on the fan
speed (HIGH-MEDIUM-LOW) - a runtime of 3-6
hours.
M31426_LivingtonCool2Go_Manual_20211011_MM.indd 4
M31426_LivingtonCool2Go_Manual_20211011_MM.indd 4
1. Use the USB cable supplied, plug the small
end into the charge opening on the side of the
device #2.
2. Connect the large end of the USB cable to
a USB adapter, laptop etc. (not included in
delivery contents) #3.
3. The On/off button starts to flash, to show that
the device is charging. When the light is no
longer flashing the device is fully charged #4.
APPLICATION (#5, #6, #7)
1. Place the device around your neck - with the
air vents facing up towards your face #5.
2. Adjust the device to fit your neck using the
adjustable/flexible neck strap #6.
3. Now press the On/Off button to switch on the
device (#7) - the light will come on, indicating
that the device is powered.
NOTE: the fan speed is set to HIGH as
standard. Press the fan speed button to
change to MEDIUM and again to change to
LOW.
4. When you have finished, press the On/Off
button until the device switches off.
Storage: Store in a cool, dry place.
Cleaning: Wipe the product with a damp cloth.
Technical data:
Model number: M31426
Battery: lithium-ion
Product: DC 5V⎓1A
Battery: 3.7 V
Power: 1800 mAh
4
Made in China
18.10.21 14:09
18.10.21 14:09

Werbung

loading