Herunterladen Inhalt Inhalt Diese Seite drucken

Equipment And Accessories; Vacuum Cleaner Preparation - Hyundai VC 800 Bedienungsanleitung

Hand- und akkustaubsauger 2 in 1
Vorschau ausblenden Andere Handbücher für VC 800:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
ACCESSORIES AND ASSEMBLY OF THE APPLIANCE:
– Do not put the suction nozzle or the tube end or accessories close to eyes and ears and
do not insert them into body orifices!
POWER CABLE:
– Check whether the data on the type label corresponds with the voltage in your socket.
The power cord plug may only be connected to the electrical socket complying with the
applicable standards.
If the power cord of the appliance is corrupted, it has to be replaced
by the manufacturer, its service technician or a similarly qualified
person.
Always disconnect the appliance from power by unplugging
the power cord from the electrical socket, if the appliance is left
unattended and before assembly, disassembly or cleaning.
Never use the appliance if the power cord or power plug are
damaged, if the appliance is not correctly operating or if it has fallen
on the floor and been damaged, or if it has fallen into water.
– Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.
– The power cord must not be damaged with sharp or hot objects, open fire, it must
not be sunk into water or bent over sharp edges.
II. EQUIPMENT AND ACCESSORIES
A – vacuum cleaner (Fig. 1, 2)
A1 – ON/OFF (
A2 – container lock button
A3 – handle
A4 – power cord
B – dust container (Fig. 2)
B1 – suction vent
B2 – hinged bottom
B3 – hinged bottom locking button
B4 – cover
B5 – HEPA filter
B6 – separator
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1.
Choose appropriate accessories as required (C1-C3) (Fig. 3). The telescopic suction tube C4
can be set to an optimum length to suit the user´s height.
) button
C – accessories (Fig. 1)
C1 – floor nozzle
C2 – brush
C3 – crevice nozzle
C4 – telescopic suction tube
C5 – telescopic suction tube locking
C6 – accessory holder
21 / 32
EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hyuvc8004684453882

Inhaltsverzeichnis