Dräger CPS 7900 Gebrauchsanweisung Seite 32

Technical data
Weight:
without boots approx. 5.1 kg
with boots approx. 6.6 kg
Material:
Chemical protective
suit D-mex
Visor Special polyvinyl chloride
Gloves Butyl or
Viton or
Silvershield: EVOH/PE or
K-Mex Gigant: Kevlar or
Tricotril: Nitril/Kevlar
Safety boots: Nitril-P
black, FPA-CR safety boots
Socks D-mex
Colors:
outside/inside blue / gray
orange / gray
Temperatures:
o
during operation -40 C to +70
lower temperatures up to -80
possible with short-term exposure and
are tested for D-mex material (tested by
Dräger, however not in the scope of the
EC type-approval test).
o
during storage -30 C to +60
possible glove combination:
Combination 1 on the inside chemical resistant Viton
glove, on the outside optional cut and
puncture-resistant Tricotril glove
Combination 2 on the
Silvershield glove, on the outside cut and
puncture-resistant Tricotril glove
Combination 3 on the inside chemical resistant Silvershield
glove, on top puncture-resistant butyl glove,
on the outside cut-resistant K-Mex Gigant
glove
32
o
C
o
C are
o
C
inside chemical resistant
Resistance against infectious agent penetration
Test
Resistance against
pathogens transmitted
by blood (with Phi-X174
bacteria)
Resistance against
infectious agent in case of
mechanical contact with
substances containing
contaminated liquids
Resistance against
biocontaminated dusts
Resistance against
biocontaminated aerosols
1 according to EN 14 126:2004
Resistance of the suit material
Test
Abrasion resistance
Flex cracking resistance
Flex cracking resistance at -
o
30 C (-22 °F)
Tear propagation resistance >150 N
Bursting resistance
Piercing resistance
Resistance to ignition
Seam strength
Tensile strength
1 according to EN 943-1:2002
Result Class
hydrostatic
pressure: 6
20 kPa
breakthrough time:
6
>75 min.
penetration:
3
<1 log cfu
penetration:
3
log r endless
Result Class
>2,000 cycles 6
>100,000 cycles 6
>4000 cycles 6
6
>850 kPa 6
>50 N 3
self-extinguishing 3
>500 N 6
>1,000 N 6
Dräger CPS 7900
1
1