Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ref.
03700L-11
03700L-12
03700L-13
03700L-14
03700L-15
03700L-16
03700L-17
03702L-1
03702L-2
03702L-3
03703L-1
03702L-4
03702L-5
03707L-7
03707L-9
03705L-3
The glow plug must be able to withstand high temperatures, high pressures, vibrations and attack of corrosive
agents which develop during the combustion.
The tip of the glow plug must be positioned very precisely to ignite the fuel.
In fact it should not penetrate too deeply into the combustion chamber as it may trigger the combustion incorrectly.
For these reasons, the replacement is problematic and the glow plugs easily break in their seat.
•
Specifications for use:
Dimension A ≥ 14 mm (M10)
Dimension A ≥ 20 mm (M9, M8)
Dimension L ≤ 13 mm
•
L (thread)
THE USE OF THIS EQUIPMENT REQUIRES ATTENTION AND CARE IN POSITIONING ON THE AXIS OF THE GLOW
PLUG TO AVOID PROBLEMS ON THE HEAD AND TO AVOID THE RISK OF BREAKING THE TOOLS; IT CAN BE HELPFUL
TO USE AS REFERENCE THE INCLINATION OF ADJACENT GLOW PLUG (SMALL DIFFERENCES: ± 5 ° ARE NOT
SIGNIFICANT FOR THE FINAL RESULT).
IMPORTANT
- During the drilling phase with two-diameter drill (for the removal of the upper threaded part of the glow plug), to preserve the quality of the drill
and increase its duration, follow absolutely these notes:
1) MAX number of revolutions: 200 revolutions/min
2) After a few mm of drilling depth (1÷3 mm), remove the drill and lubricate with cutting fluid, blow the seat of the glow plug to remove the metal shavings.
Carry on the drilling phase in this way till the complete removal of the threaded part of the glow plug.
Description
Hammer
M8 pin
M10x1 male
M10x1.25 male
2.5 mm allen key
Ø 15 mm extension for extraction pin
Ø 16 mm extension
Twist drill bit Ø 4.5 mm
Extension + Ø 8 - Ø 4.5 mm drill bit
12-28 male
Extension + Ø 7 - Ø 4.5 mm drill bit
12-28 threaded insert
M9x1 male
1/4" – 28 male
1/4" threaded insert
M8x1 male
L
A
0 3 7 0 1 L
M10x1
M10x1.25
M9
(M8)
12-28 UNF
M8
M9x1
(M10)
1/4-28 UNF
(M10)
1/4-28 UNF
M8x1
7
Werbung
