Silverline 953705 Bedienungsanleitung Seite 10

GB
Maintenance
WARNING: Always disconnect the tool from the power supply, before cleaning or carrying out
maintenance.
General inspection
• Regularly check that all the fixin screws are tight. They may vibrate loose over time
• Repairs should be carried out by an authorised Silverline service centre.
Emptying the Dust Bag
WARNING: Always wear respiratory protection, eye protection and gloves when emptying the
Dust Bag (7).
IMPORTANT: Always clean the tool THOROUGHLY when switching from sanding wood to sanding
metal and vice versa.
IMPORTANT: If the sanding dust contains harmful substances, such as particles from old paint,
varnish, surface coatings etc., always dispose of according to laws and regulations.
Cleaning
WARNING: ALWAYS wear protective equipment including eye protection and gloves when
cleaning this tool.
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and
shorten the device's service life
• Clean the body of your tool with a soft brush, or dry cloth
• Never use caustic agents to clean plastic parts. If dry cleaning is not sufficient a mild detergent
on a damp cloth is recommended
• Water must never come into contact with the tool
• Ensure the tool is thoroughly dry before using it
• If available, use clean, dry, compressed air to blow through the ventilation holes (where
applicable)
Brushes
• Over time the carbon brushes inside the motor may become worn
• Excessively worn brushes may cause loss of power, intermittent failure, or visible sparking
• If you suspect that the brushes may be worn, have them replaced at an authorised service centre
10
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: silverlinetools.com/en-GB/Support
Address:
Toolstream Ltd
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
• For long-term storage, remove batteries and store separately
Disposal
Li-ion batteries should not be disposed of with household waste. If you do not know of a li-ion battery
recycling centre in your area, contact your local authority or original dealer for advice on disposal of
li-ion batteries.
Always adhere to national regulations when disposing of power tools that are no longer functional
and are not viable for repair.
• Do not dispose of power tools, batteries or other waste electrical and electronic equipment
(WEEE), with household waste
• Contact your local waste disposal authority for information on the correct way to dispose of power
tools and batteries