Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GWS Professional 9-115 Originalbetriebsanleitung

22 | English
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the off position
u
when the power supply is interrupted, e. g., in case of
a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.

Technical Data

Angle grinder GWS
Article number
Rated power input
Power output
Rated speed min
Speed adjustment range min
Max. grinding disc dia-
meter
1 609 92A 6PL | (15.06.2021)
9-115
3 601 G9B 0.. 3 601 G9C 0..
W 900
W 530
-1
11,500 11,500
-1
–
mm 115
Autogoods "130"
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/off switch
(4) Speed preselection thumbwheel
(GWS 13-125 CIE / GWS 15-125 CIE /
GWS 15-125 Inox / GWS 17-125 CIE /
GWS 17-125 CIT / GWS 17-125 Inox /
GWS 19-125 CIE)
(5) Auxiliary handle (insulated gripping surface)
(6) Protective guard for cutting
(7) Protective guard for grinding
(8) Extraction guard for grinding
(9) Mounting flange with O‑ring
a)
(10) Carbide grinding head
a)
(11) Grinding disc
a)
(12) Cutting disc
(13) Quick-clamping nut
(14) Clamping nut
(15) Two-pin spanner for clamping nut
(16) Grinding spindle
(17) Handle (insulated gripping surface)
(18) Extraction guard for cutting with cutting guides
a)
(19) Diamond cutting disc
a)
(20) Hand guard
a)
(21) Cup brush
a)
(22) Rubber sanding pad
a)
(23) Abrasive disc
a)
(24) Round nut
a)
(25) Diamond annular cutter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
9-125 11-125 12-125 CI
3 601 G9D 0.. 3 601 G93 06. 3 601 G93 0G.
900 1100
530 740
11,500
– –
125 125
a)
a)
a)
a)
a)
12-125 CI
1150 1200
530 640
11,500 11,500
– –
125 125
Bosch Power Tools