Electrical Rating - Dymo Rhino 6000+ Erste Schritte

Using the Label Printer with Your Computer
Your label printer can be used as a standalone label printer or you can print labels directly
from your computer using the latest version of DYMO ID
Download the latest version of DYMO ID
support.dymo.com.
Rechargeable Battery Safety Precautions
Battery type: LiPolymer 7.4V 1400mAh 10.36Wh
Inaccurate handling of a lithium-ion polymer rechargeable battery may cause leakage, heat,
smoke, an explosion, or fire. This could cause deterioration of performance or failure. This
may also damage the protection device installed in the battery. This could damage equipment
or injure users. Thoroughly follow the instructions below.
Danger
Use the battery only in the Rhino 6000 + label printer.

 Battery can only be charged while inserted in the label printer using the charging adapter
provided (9VDC/2A).
Do not connect directly to an electric outlet or cigarette lighter charger.

Do not store battery close to fire or inside the car where temperature may be over 60°C.

Warning
Stop charging the battery if charging is not completed within 3.5 hours.

Caution
 Do not use the label printer or battery in a place that generates static electricity.
 Use the label printer only at room temperature.
Battery can only be charged within +10°C to 35°C temperature range.

Battery can only be discharged within -10°C to 60°C temperature range.

Use only an authentic DYMO battery.


Electrical Rating

Printer
Power adapter
™
software from the DYMO Web site at
Input: 9V, 2.0A
Input: 100-240V 50/60Hz 0.6A
Output: 9V, 2.0A
™
software.
3
EN
EN