Dymo Rhino 6000+ Erste Schritte Seite 4

Inserting the label cartridge
Your printer uses DYMO IND label cartridges. Visit www.dymo.com for information about
purchasing additional label cartridges.
To insert the label cartridge
1 Lift the label cartridge cover to open the label
compartment.
2 Make sure the label and ribbon are taut across the
mouth of the cartridge and that the label passes
between the guideposts. If necessary, turn the spool
clockwise to tighten the ribbon.
3 Insert the cartridge and press gently until the cartridge is
eased into place.
4 Make sure the two blue clips lock the cartridge in place.
Refer to the label on the cartridge.
5 Close the label cartridge cover.
To remove the label cartridge, press the eject button. The label cartridge is automatically lifted
for easy removal.
Printing your first label with the printer
The first time you turn on the printer, you are asked to select your language and units of
measure. You are also asked to select the width of the tape cartridge currently inserted in the
printer.
To print your first label
1 Press to turn on the power.
2 Enter some text for your label using the alphanumeric keys.
3 Press PRINT.
4 Press CUT and remove the label.
5 Remove the backing from the label to expose the adhesive, and
then attach the label.
2
Lift
Eject
Button
Split backing