Bestway FlowClear 58381 Gebrauchsanweisung Seite 3

3.5m.
• When the appliance will be not used for a long time, such as in the winter,
the pool set should be disassembled and stored indoor.
• Electric installations should follow national wiring rules.
• Only the media provided or specified by the manufacturer is to be used
with product installation.
• It is essential to check that the suction openings are not obstructed.
• It is advisable to stop the filtration during maintenance operations on
the filtration system.
• Regularly monitor the filter clogging level.
• A weekly check is recommended for cleaning.
• Minimum daily filtration operating time of 8 hours is recommended to
ensure clear pool water.
• It is essential to change any damaged element or set of elements as
soon as possible. Use only parts approved by person responsible for
placing the product on the market.
• All filters and filter media shall be inspected regularly to ensure that there
is not a build-up of detritus thus preventing good filtration. The disposal
of any used filter media should also be in accordance with applicable
regulations/ legislation.
• The water circulation installation shall comply with the European as well
as national/local regulations, especially when dealing with electrical
issues. Any change of valve position, pump size, grille size can cause
a change of the flow and the suction velocity can be increased.
• It is necessary to have the plug accessible after installation of the pool.
• Please read the instruction manual carefully and keep it for future
reference.
• If instruction is missed, please contact with Bestway or search it in
website: www.bestwaycorp.com
DISPOSAL
Electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.
TECHNICAL SAFETY INSTRUCTIONS
• Risk of electric shock, never run the filter pump when people are
swimming in the pool.
• The appliance must be supplied by an earthed power source.
• The supply cord cannot be replaced. If the cord is damaged the appliance
3