Configuring Picture Settings; Operating Picture Settings Menu Items; Picture Settings Menu Items; Pc Picture Settings - Sharp LC-40LE530E Bedienungsanleitung

Panoramic
This stretches the left and right sides of a normal picture (4:3 aspect
ratio) to fill the screen, without making the picture appear unnatural.
The top and bottom of the picture are slightly cut off.
Cinema
This zooms up the wide picture (16:9 aspect ratio) to the full screen.
Conguring Picture Settings
You can use different picture settings in detail.
Press "MENU" button and select the Picture icon by using " " or " "
button. Press OK button to view Picture Settings menu.

Operating Picture Settings Menu Items

• Press " " or " " button to highlight a menu item.
• Use " " or " " button to set an item.
• Press "MENU" button to exit.

Picture Settings Menu Items

Mode: For your viewing requirements, you can set the related
mode option. Picture mode can be set to one of these options:
Cinema,Game,Dynamic and Natural.
Contrast: Sets the lightness and darkness values of the screen.
Brightness: Sets the brightness value for the screen.
Sharpness: Sets the sharpness value for the objects displayed on
the screen.
Colour: Sets the colour value, adjusting the colors.
Colour Shift: Adjust the desired colour tone.
Colour Temp: Sets the desired colour tone.
Setting Cool option gives white colours a slight blue stress.
For normal colours, select Normal option.
Setting Warm option gives white colours a slight red stress.
Noise Reduction: If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to reduce the noise amount.
Noise Reduction can be set to one of these options: Low, Medium,
High or Off.
Movie Sense: Press " "/" " button to select Movie Sense. Use "
"/" " to set Movie Sense Low, Med, High or Off. While Movie Sense
is active, it will optimize the TV's video settings for motional images to
acquire a better quality and readibility.
When Movie Sense option is set to Low, Med or High, Movie Sense
demo option will be available. If one of these options is selected and if
you press OK button, then the demo mode starts. While demo mode
is active, the screen will be divided into two sections, one displaying
the movie sense activity, the other displaying the normal settings for
TV screen.
Game Mode: When Game Mode is set to On, specific game mode
settings, which are optimized for better video quality, will be loaded.
Note: When Game Mode is on, some items in the Picture Settings
menu will be unavailable to be set.
Picture Zoom:Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom,
4:3, Panoramic or Cinema.
Reset: Resets the picture settings to factory default settings.
While in VGA (PC) mode, some items in Picture menu will be
unavailable. Instead, VGA mode settings will be added to the Picture
Settings while in PC mode.

PC Picture Settings

For adjusting PC picture items, do the following:
Press " " or " " button to select Picture icon. Picture menu appears
on the screen.
Contrast, Brightness, Colour, Colour Temp and Picture Zoom
settings in this menu are identical to settings defined in TV picture
menu under "Main Menu System".
Sound,Settings and Source settings are identical to the settings explained
in main menu system.
PC Position: Select this to display PC position menu items.
Autoposition: Automatically optimizes the display. Press OK to
optimize.
H Position: This item shifts the image horizontally to right hand side
or left hand side of the screen.
V Position: This item shifts the image vertically towards the top or
bottom of the screen.
Dot Clock: Dot Clock adjustments correct the interference that appear
as vertical banding in dot intensive presentations like spreadsheets or
paragraphs or text in smaller fonts.
Phase: Depending on the resolution and scan frequency that you input
to the TV set, you may see a hazy or noisy picture on the screen. In
such a case you can use this item to get a clear picture by trial and
error method.
English - 18 -